Mechanism Of Defoamers

Feb 15, 2024

The defoaming mechanism of foam has not yet been fully understood, and there are some different theoretical views. Further research is needed. Defoamers have two properties; First, foam breaking property, that is, the property of rapidly breaking formed foam. Generally speaking, substances with good spread (dispersion) have good foam breaking property; The second is anti foaming ability, which refers to the ability to inhibit the foaming of a solution. Generally speaking, substances with low solubility have good anti foaming ability, and anti foaming agents must have anti foaming ability. Therefore, an ideal anti foaming agent is a chemical that has both good spreading ability and low solubility. As we all know, pure water is not easy to form stable foam. The foam is easy to form after the surfactant is added, because the following factors must be met to form a foam:
(1) Reduce surface ability to make gases easily dispersed in liquids;
(2) It has a stable foam film. The elasticity of the film will resist the pressure of bubbles. Generally, a bimolecular layer of surfactant is adsorbed on the surface of the liquid film. The elasticity of the liquid film can inhibit the local reduction of the liquid film or resist the stretching pressure of the liquid film. The force of anti stretching or anti thinning can be generated during the process of the liquid film stretching or thinning. These are the consequences of the surfactant adsorbed on the bimolecular layer;
(3) To prevent the loss of liquid between liquid films, it is necessary to have a certain viscosity. It can prevent the merging of bubbles. In addition, the surface of the liquid film has a high electrokinetic layer potential, which can inhibit the merging of bubbles.