Wetting and Dispersing Additive
● Combination of nonionic/anionic surfactants
● Specifically designed for water-based systems
● Improves wetting and dispersing performance of wide range of pigments
● Used as dispersant in resin-free system, as co-dispersant and grind aid in resin system
● Silicone-free, APEO free
Description
Wetting and dispersing additive
Low-foam Wetting and Dispersing Agent, Pigment Grind Aid
SURFADOL® 338
Special properties
● Combination of nonionic/anionic surfactants
● Specifically designed for water-based systems
● Improves wetting and dispersing performance of wide range of pigments
● Used as dispersant in resin-free system, as co-dispersant and grind aid in resin system
● Silicone-free, APEO free
Examples of application
● Inorganic pigments, iron oxide or titanium dioxide pigments
● Water-based inks and dyes
Processing instructions
● Maintain adequate agitation and allow mix times of at least 15–30 minutes.
● Addition to the system as supplied or as a predilution is possible.
● Addition to the grind stage.
Typical properties
|
Active matter |
Acetylenic diols, Anionic surfactant |
|
Active matter content |
86% |
|
Solvent |
Ethylene Glycol, Butyl Cellosolve |
|
HLB value |
8-20 |
|
Suggested use level |
1% -8% w.t. |
Specifications
|
Test Item |
Standard |
|
Appearance |
Brownish yellow liquid |
|
Density at 25°C, g/cm3 |
1.000-1.100 |
Package and storage
The standard package for this material is 180kg plastic drums, 4 drums/pallet.
It is also available in IBC totes and 20kg pails.
Keep containers tightly closed in a dry, cool, and well-ventilated place.
The shelf life for this product is 24 months from the date of manufacture.
Hot Tags: wetting and dispersing additive, China wetting and dispersing additive manufacturers, suppliers, factory
