Low Cure Additive for Plastisol Ink
SURFADOL 465 is a nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. 465 has a high cloud point for utilization in high temperature systems. The product also complies with certain FDA regulations. Additives for plastisol ink.
Description
Low cure additive for plastisol ink
SURFADOL 465 is a nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. 465 has a high cloud point for utilization in high temperature systems. The product also complies with certain FDA regulations. Additives for plastisol ink.
Advantages
● Low-foam and reduce dynamic surface tension
● Improves wetting of various substrates and pigments
● Stable in most high electrolyte and brine system
● Wets and prevents smut formation in metalworking fluids
● No APEs, HAPs or solvents
● No siloxanes, silicones or fluorosurfactants
Typical Properties
|
Appearance |
Clear & yellow liquid |
|
Active matter content |
100% |
|
Cloud Point (5% solution, water:BC=2:1 ) |
62-64℃ |
|
Solubility in water |
slightly soluble |
|
Density at 20°C, g/cm3 |
1.035-1.040 |
|
Viscosity at 20°C, cps |
<200 |
|
HLB |
13 |
Hot Tags: low cure additive for plastisol ink, China low cure additive for plastisol ink manufacturers, suppliers, factory, additives for plastics, additives for lubricants, additives for defoamers, additives for beverages, additives for bactericides, additives for emulsions
